User's Manual

10
CardBus Enhanced Wireless Network Adapter
step6.
Click
Next
. The Add New Hardware Wizard will complete the
installation.
step7.
Click
Finish
and follow the on-screen instructions to complete
the installation.
Uninstalling the Driver from Windows Me
To completely remove the adapter and driver from your system you will need to
physically remove the adapter (with the system powered off). The removal
procedure is the reverse of the hardware installation procedure on page 4. Restart
the computer and then proceed as follows:
step1.
Click
Start/Settings/Control Panel
. Double-click the
Network
icon, then highlight the entry
TI ACX100 WLAN Adapter
.
step2.
Click the
Remove
button to remove the adapter driver.
step3.
Click
OK
. The system will ask you to restart the PC. Click
Yes
.
Installation in Windows 2000
step1.
Turn on the power to the PC and start the Windows 2000 operating
system.
step2.
The Found New Hardware Wizard dialog box will open. Click
Next
.
step3.
Choose Search for a suitable driver for my device and click
Next
.
step4.
Check Specify a location. Click
Next
.
step5.
Insert the adapter driver disk. Type
a:\win2k
(assuming the floppy disk
drive is drive A) and click
OK
.
step6.
Click
Next
when Windows finds a driver for this device.
step7.
Click
Yes
to begin copying the driver files.
step8.
In the Completing the Found New Hardware window, click
Finish
.