User's Manual

CardBus Enhanced Wireless Network Adapter
11
Uninstalling the Driver from Windows 2000
To completely remove the adapter and driver from your system you will need to
uninstall the device driver first:
step1.
Click
Start/Settings/Control Panel
. Double-click the
System
icon, then
select the Hardware tab and click
Device Manager
.
step2.
Highlight the entry
TI ACX100 WLAN Adapter
in the the Network
Adapters section.
step3.
Click the right mouse button and select Uninstall.
step4.
Click
OK
to confirm the device removal.
step5.
Click
OK
to close Device Manager and the System Properties window.
Then shut down the computer and physically remove the adapter. The hardware
removal procedure is the reverse of the hardware installation procedure on page 4.
Installation in Windows XP
step1.
Turn on the power to the PC and start the Windows XP operating
system.
step2.
The Found New Hardware Wizard dialog box will open. Click
Next
.
step3.
Check Install from a list or Specify a location and click
Next
.
step4.
Check Include this location in the search.
step5.
Insert the driver disk. Type
a:\winxp
(assuming the floppy disk drive is
drive A) and click
OK
.
step6.
Click
Next
when Windows finds the driver for the adapter.
step7.
Click
Continue Anyway
to begin copying the driver files.
step8.
In the Completing the Found New Hardware window, click
Finish
.
Uninstalling the Driver from Windows XP
To completely remove the adapter and driver from your system you will need to
uninstall the device driver first: