User's Manual

30
CardBus Enhanced Wireless Network Adapter
The utility or the network
rejects the domain name
(SSID)
Please note the following points when inputting an
SSID during adapter installation:
(1) The domain name (SSID) is case-sensitive.
(2) There should not be any spaces in the SSID.
After the InstantWave
utility is successfully
installed, executing the
utility may cause a "Divide
Error.”
When the InstantWave utility is successfully installed,
please remember to reboot your machine although the
installation program didn't force you to. After the
system is rebooted, the utility will run normally.
I installed the NWH1022
adapter under Windows 98
(SE) on my IBM ThinkPad
X20. There was no
problem while installing
the driver or utility, but
when I reboot the notebook
it seems hung/frozen.
The IBM ThinkPad X20 and some other notebooks
need more time to get/set the TCP/IP parameters for a
wired or wireless network adapter. Please be patient
and wait 3 to 5 minutes for the machine to
boot. After booting, the NWH1022 will operate
normally.
When I tried to install the
NWH1022 on my Compaq
laptop, the system
recognized it as a
"PCMCIA-MTD-0002" and
the installation failed.
This problem was found on some Compaq laptops
using the Phoenix BIOS, which creates a hardware
conflict problem. To resolve this issue, disable the
Sound Blaster setting in the Phoenix BIOS, but do not
disable Onboard PCI Audio in the Phoenix BIOS.