User's Manual

CardBus Enhanced Wireless Network Adapter
1
Introduction
Thank you for choosing an InstantWave wireless networking product. This guide
gives comprehensive instructions on installing and using the InstantWave
NWH1022 CardBus enhanced wireless network adapter, and also explains how to
install and use the InstantWave utility program.
Your InstantWave wireless network adapter is part of a family of easy-to-use, high-
performance wireless communication products. This family of products includes:
• InstantWave 11-Mbps Wireless Access Point (NWH650)
• InstantWave 11-Mbps Wireless Access Point (NWH660)
• InstantWave 11-Mbps Wireless Workgroup Bridge (NWH6210)
• InstantWave 11-Mbps Wireless Ethernet Client (NWH2210)
• InstantWave 11-Mbps Wireless Secure Router (NWH8010)
• InstantWave 11-Mbps Wireless PC Card (NWH1010)
• InstantWave 11-Mbps Wireless PCI Card (NWH630)
System Requirements
Hardware
The adapter is designed to be installed in an IBM-type microcomputer with a
CardBus interface (also known as a PCMCIA or PC Card interface or slot). The
minimum system configuration is the same as that required to run Microsoft
Windows (Windows 98, Me, 2000, or XP).
To allow installation of the driver and utility software for the adapter, the computer
must have a 3.5-inch floppy disk drive.
Software
The utility and driver software included with the adapter will work in Microsoft
Windows 98, Windows ME, Windows 2000, and Windows XP.