User's Manual

National Electronics & Watch Co, Ltd.
DATA mode
How to view the Data
• Press S2 button from OFF screen to enter DATA mode.
• Press and hold S2 to enter DAILY data.
While DAILY is blinking, press S1 to select EXERCISE data, SLEEP data and DAILY data.
• Press S2 button to view the data.
Follow the function flow as shown for Exercise & Sleep data.
SET
• Press S2 button from display OFF screen to enter SET mode.
• Press and hold S2 button to enter setting mode. TIME appears and blinks
• Press S1 button to scroll through the parameters to set: TIME Æ UNIT Æ USER Æ SLEEP Æ
GOAL Æ BLE Æ MOVE TIME Æ VIBRATION Æ back to Time.
How to Set
• Press and hold S2 button until “TIME” appears and blinks.
• Press S2 to set the Hour Æ Minute Æ Seconds Æ Month Æ Day Æ Year Æ 12/24H Æ MM-
DD / DD.MM and go back to Time mode.
• PressS1 button to change the values of the blinking digits.
• Press and hold S2 to confirm setting.
• Press and hold S2 again to exit Time setting and it will return to Time mode.
Notes:
¾ Same procedure applied in setting other parameters such as; UNIT, USER, SLEEP,
GOAL (Calorie or Step), BLE, MOVE TIME and VIBRATION.
¾ The Smart Gear device has an auto OFF screen function. Press any of the buttons will
turn ON the screen.