Weather Radio User Manual

Indoor/Outdoor

Wireless Thermometer

Monitor:

A. Indoor Temperature Trend

B. Indoor Temperature

C. Channel

D. Outdoor Temperature Trend

E. Outdoor Temperature

1. Max/Min Button

2. CH Button

3. °C/°F Button

Sensor:

4. TX Button

5. Channel Switch (Under Battery Cover)

Care of the Device

• Avoid exposing units to extreme temperatures or severe shock.

• Avoid contact with any corrosive materials such as perfume, alcohol or

cleaning agents.

• Do not subject the units to excessive force, shock, dust, temperature or

humidity. Any of these conditions may shorten the life of the units.

• Do not tamper with any of the internal components of these units. This

will invalidate the warranty and may cause damage.

Correct Usage of Batteries

• Do not mix standard and rechargeable batteries.

• Do not mix new and old batteries.

• When the low battery symbol appears on the display replace all

batteries with new ones.

Setup Procedure

1. Insert batteries into the monitor rst.

2. Using a screwdriver (not included) remove the screws on the back of the

sensor to open the battery compartment.

3. Place the monitor as close as possible next to the remote sensor. Before

inserting the batteries into the sensor ensure the correct channel is

selected, then insert the batteries into the remote sensor.

4. The remote sensor will send a signal to the monitor. Once the signal is

received, the dashes (--.-°F) on the monitor will change to the current

outdoor temperature.