Weather Radio User Manual

press the CH button until is displayed on the LCD.
The monitor will auto-scroll through all the channels.
Press and hold the CH button if the outdoor temperature needs to be reset.
The outdoor temperature of that particular channel will reset and display
dashes (--.-°C). Press the TX button on the back of the sensor to force
the sensor to send a transmission to the monitor, and then the current
temperature should once again be displayed on the monitor.
Installing the Monitor
The monitor can be placed on any at surface or
mounted on a wall.
IMPORTANT: Do not place the monitor in direct
sunlight or where exposed to any other sources of
heat or air conditioning to ensure accurate tempera
ture readings.
Installing the Remote Sensor
To prevent temperature interference, place the
remote sensor outside away from direct sunlight,
and rain. The remote sensor is designed to be splash
proof; never immerse into water or expose to heavy
rain.
Maximum and Minimum Memory
1. Press the MAX/MIN button once to display the minimum readings. Press
the MAX/MIN button again to display the maximum readings.
2. To clear the memory, press and hold the MAX/MIN button when the max
or min readings are displayed. This will reset the memory to the current
temperature readings being displayed on the monitor.
°C/°F Switchable
The default measurement for temperature is °F, press the °C/°F button to
toggle between °C and °F.
4