Computer Hardware User Manual
Index
National Instruments Corporation I -13 AT-MIO/AI E Series User Manual
T
technical support, D-1 to D-2
theory of operation. See hardware overview.
ACH<0..63> signal
description (table), 4-5
timebases, board and RTSI clocks, 3-21
timing connections, 4-30 to 4-57
common questions about, C-5 to C-8
data acquisition timing
connections, 4-32 to 4-42
AIGATE signal, 4-41
CONVERT* signal, 4-39 to 4-40
EXTSTROBE* signal, 4-33 to 4-34
SCANCLK signal, 4-33
SISOURCE signal, 4-41 to 4-42
STARTSCAN signal, 4-37 to 4-39
TRIG1 signal, 4-34 to 4-35
TRIG2 signal, 4-36
digital ports A, B, and C, 4-53 to 4-57
mode 1 input timing, 4-55
mode 1 output timing, 4-56
mode 2 bidirectional timing, 4-57
Port C signal assignments
(table), 4-53
timing signals (table), 4-54
general-purpose timing signal
connections, 4-46 to 4-57
FREQ_OUT signal, 4-52
GPCTR0_GATE signal, 4-47
GPCTR0_OUT signal, 4-47 to 4-48
GPCTR0_SOURCE signal, 4-46
GPCTR0_UP_DOWN signal, 4-48
GPCTR1_GATE signal, 4-49 to 4-50
GPCTR1_OUT signal, 4-50
GPCTR1_SOURCE signal,
4-48 to 4-49
GPCTR1_UP_DOWN signal,
4-51 to 4-52
programmable function input
connections, 4-31 to 4-32
waveform generation timing
connections, 4-42 to 4-45
UNISOURCE signal, 4-45
UPDATE* signal, 4-43 to 4-44
WFTRIG signal, 4-42 to 4-43
timing I/O specifications
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-8 to A-9
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-17
AT-MIO-16XE-10 and
AT-AI-16XE-10, A-24
AT-MIO-16XE-50, A-30 to A-31
timing signal routing, 3-19 to 3-22
board and RTSI clocks, 3-21
programmable function
inputs, 3-20 to 3-21
RTSI triggers, 3-21 to 3-22
transfer characteristics
analog input
AT-MIO-16E-1, AT-MIO-16E-2
and AT-MIO-64E-3, A-3
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-12
AT-MIO-16XE-10 and
AT-AI-16XE-10, A-20
AT-MIO-16XE-50, A-27
analog output
AT-MIO-16E-1, AT-MIO-16E-2
and AT-MIO-64E-3, A-6 to A-7
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-14
AT-MIO-16XE-10, A-22
AT-MIO-16XE-50, A-28 to A-29
TRIG1 signal timing connections, 4-34 to 4-35
TRIG2 signal timing connections, 4-36
triggers
analog, 3-15 to 3-18
block diagram, 3-16
RTSI triggers, 3-21 to 3-22
specifications
AT-MIO-16E-1, AT-MIO-16E-2
and AT-MIO-64E-3
analog trigger, A-9
digital trigger, A-10
RTSI, A-10