User's Manual

Chapter 2 Installation and Verification
PCI Serial for Windows Me/9x 2-4 ni.com
Figure 2-3. PCI Serial Board Installation
7. Screw the PCI serial board mounting bracket to the back panel
mounting rail of the computer.
8. Replace the cover.
9. Turn on your computer and start Windows Me/9x.
10. Windows Me/9x should automatically detect your hardware and
display one or more New Hardware Found dialog boxes. Your
operating system (Windows Me/9x) may show the Windows Default
Driver option. If so, make sure the Windows Default Driver is
selected and click on the OK button. If the Windows Default Driver
option is not shown, the installation continues automatically.
If no New Hardware Found dialog box appears, refer to the Forcing
Windows to Detect Your Hardware section in Appendix C,
Troubleshooting and Common Questions.
The serial hardware installation is complete. Continue to the next section,
Verify the Installation.
Personal
Computer
PCI Serial Board
PCI Slot