Datasheet

DC Power Supply Isolation Voltages

+25 V and -25 V-to-earth ground, continuous 60 VDC, Measurement Category I

Note Measurement Categories CAT I and CAT O are equivalent. These test and

measurement circuits are not intended for direct connection to the MAINS building

installations of Measurement Categories CAT II, CAT III, or CAT IV.

Environmental

Operating temperature

0 °C to 40 °C

Storage temperature -20 °C to 70 °C

Operating humidity 10% to 90% RH, noncondensing

DMM full accuracy at 10% to 80%

Storage humidity 5% to 95% RH, noncondensing

Cooling Forced air circulation (positive pressurization)

through a fan. Fan speed automatically adjusts

according to operating conditions. Intake and

exhaust locations are on rear of device. Ensure

that the intake and exhaust locations are not

obstructed.

Pollution Degree 2

Maximum altitude 2,000 m

Indoor use only.

Shock and Vibration

Operational shock

30 g peak, half-sine, 11 ms pulse (Tested

in accordance with IEC 60068-2-27. Test

profile developed in accordance with

MIL-PRF-28800F.)

Random vibration

Operating 5 Hz to 500 Hz, 0.3 g

rms

Nonoperating 5 Hz to 500 Hz, 2.4 g

rms

(Tested in accordance

with IEC 60068-2-64. Nonoperating test

profile exceeds the requirements of

MIL-PRF-28800F, Class 3.)