Datasheet

Safety

This product is designed to meet the requirements of the following electrical equipment safety

standards for measurement, control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

Note For UL and other safety certifications, refer to the product label or the Online

Product Certification section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for electrical equipment

for measurement, control, and laboratory use; for radio equipment; and for telecommunication

terminal equipment:

• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity

• EN 55011 (CISPR 11): Group 1, Class A emissions

• EN 55022 (CISPR 22): Class A emissions

• EN 55024 (CISPR 24): Immunity

• AS/NZS CISPR 11: Group 1, Class A emissions

• AS/NZS CISPR 22: Class A emissions

• FCC 47 CFR Part 15B: Class A emissions

• ICES-001: Class A emissions

Note In the United States (per FCC 47 CFR), Class A equipment is intended for

use in commercial, light-industrial, and heavy-industrial locations. In Europe,

Canada, Australia and New Zealand (per CISPR 11) Class A equipment is intended

for use only in heavy-industrial locations.

Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical

equipment that does not intentionally generate radio frequency energy for the

treatment of material or inspection/analysis purposes.

Note For EMC declarations and certifications, and additional information, refer to

the Online Product Certification section.

CE Compliance

This product meets the essential requirements of applicable European Directives, as follows:

• 2014/35/EU; Low-Voltage Directive (safety)

• 2014/30/EU; Electromagnetic Compatibility Directive (EMC)

• 2014/53/EU; Radio Equipment Directive (RED)

16 | ni.com | NI VirtualBench VB-8012 Specifications