Bridge User Manual

Chapter 13 Front Panel Object Attributes
© National Instruments Corporation 13-3 BridgeVIEW User Manual
Activity 13-1. Use an Attribute Node
Your objective is to create a VI that indicates a high limit condition
using attribute nodes. You will use the Fill Color attribute of a
Tank indicator to indicate whether a randomly generated tank
level has gone above the user-defined limit.
Front Panel
1. Open a new front panel and create it as shown in the following
illustration.
2. Rescale the tank from
0.0
to
100.0
.
3. Set the default Limit Setting to
50.00
.
Block Diagram
4. Create the block diagram as shown below.