Network Card User Manual

© National Instruments Corp. 3 FP-1600
Figure 2.
Mounting the FP-1600 onto a DIN Rail
b. Slide the FP-1600 to the desired position along the
DIN rail.
c. Lock the FP-1600 to the DIN rail by pushing the rail
clip to the locked position.
• Installing onto a panel mount accessory, which you can
order separately from National Instruments:
a. Snap the panel mount accessory onto the module,
as shown in Figure 3.
Figure 3.
Mounting the FP-1600 onto a Panel Mount Accessory
Cover
Press
35 mm DIN Rail
Lip
Local Bus
Connector
Press