Isolated Analog Input Device User's Manual

Chapter 3 Configuring and Testing

Verifying and Self-Testing an NI-DAQmx Task or Global Channel

After you have created an analog input voltage NI-DAQmx Task or

NI-DAQmx Global Channel, verify the NI-DAQmx Task or NI-DAQmx

Global Channel signal and functionality using the Test button in the

toolbar:

1. If you created an NI-DAQmx Task, set the timing and triggering

settings you wish to use in the test in the Task Timing and Task

Triggering tabs.

2. Click the Test button to open the test panel and take a measurement.

You have now verified the NI PXI-4224 configuration and signal

connection.