Isolated Analog Input Device User's Manual

Removing the NI PXI-4224

This appendix provides details for removing an NI PXI-4224 device from

MAX and from a PXI or PXI/SCXI combination chassis.

Note You must physically remove the NI PXI-4224 from the chassis before you can

remove it from MAX.

Removing the NI PXI-4224 from a PXI or PXI/SCXI

Combination Chassis

Consult the PXI or PXI/SCXI chassis documentation for additional

instructions and cautions. To remove the NI PXI-4224 device from a PXI

or PXI/SCXI chassis, complete the following steps while referring to

Figure C-1:

1. Power off the PXI chassis. Do not remove the NI PXI-4224 device

from a chassis that is powered on. If the you are using a PXI/SCXI

combination chassis, also power off the SCXI portion of the chassis.

2. Rotate the mounting screws that secure the NI PXI-4224 to the chassis

counter-clockwise until they are loose, but do not completely remove

the screws.

3. Remove the NI PXI-4224 by pushing down steadily on the

injector/ejector handle until the device disengages from the chassis.

4. Slide the device completely out.

The next time you restart the computer the NI PXI-4224 will have a red

circle with a white X inside it next to the device in MAX.