MXI-Express Series User Manual

Appendix A Specifications

MXI-Express Series User Manual A-4 ni.com

Caution Clean the NI PXI-8360 and NI PCIe-8360 with a soft nonmetallic brush. Make

sure that the device is completely dry and free from contaminants before returning it to

service.

Note For full EMC compliance, operate this device with shielded cabling. In addition, all

covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC)

for this product for any additional regulatory compliance information. To obtain the DoC

for this product, visit

ni.com/certification, search by model number or product line,

and click the appropriate link in the Certification column.

Safety

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1

• CAN/CSA-C22.2 No. 61010-1

Note For UL and other safety certifications, refer to the product label or visit

ni.com/certification, search by model number or product line, and click the

appropriate link in the Certification column.

Electromagnetic Compatibility

Emissions................................................EN 55011 Class A at 10 m.

FCC Part 15A above 1 GHz

Immunity ................................................EN 61326:1997 + A2:2001,

Table 1

CE, C-Tick, and FCC Part 15 (Class A) Compliant

Note For EMC compliance, operate this device with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety)..............73/23/EEC

Electromagnetic Compatibility

Directive (EMC) .....................................89/336/EEC