Wireless Access Point User's Manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Web Console Configuration
- A. Default Settings
- B. Troubleshooting
- C. Regulatory Statement
- D. Technical Support and Professional Services
NI WAP-3701/3711 User’s Manual Troubleshooting
B-4
The NI WAP-3701/3711 stops working and does not respond to Web management requests.
y
The firmware of the AP may be stuck in an incorrect state.
¾
Unplug the power connector from the power jack, and then re-plug the connector to
restart the AP.
¾
Report this problem to our technical support staff.
y
If the AP still does not work after being restarted, some hardware components of the AP may
have failed.
¾
Contact our technical support staff.