User's Manual

Index
© National Instruments Corporation I-3 NI PCI-1426 User Manual
S
scatter-gather DMA controllers, 2-8
SDRAM, 2-4
serial interface, 2-9
SerTC± signal (table), 3-4
SerTFG± signal (table), 3-4
signal connections
connectors
15-pin D-SUB connector, 3-3
MDR 26-pin connector, 3-2
NI 1426 connectors (figure), 3-1
signal descriptions, 3-4
software (NI resources), B-1
software controlled start conditions, 2-8
software programming choices, 1-2
integration with DAQ, 1-4
NI Vision Builder for Automated
Inspection, 1-3
NI Vision Development Module, 1-3
NI-IMAQ driver software, 1-2
start conditions
delayed acquisition, 2-8
software control, 2-8
trigger control, 2-8
support, technical, B-1
T
technical support, B-1
timing circuitry, high-speed, 2-7
training and certification (NI resources), B-1
trigger
configuration options (table), 2-5
control and mapping circuitry, 2-4
controlled start conditions, 2-8
troubleshooting (NI resources), B-1
TTL_TRIG signal (table), 3-4
W
Web resources, B-1
X
X<3..0>± signal (table), 3-4
XCLK± signal (table), 3-4