Computer Accessories User Manual

Chapter 10 Virtual Bench-Device Calibrator
Getting Started with VirtualBench 10-2
© National Instruments Corporation
Calibrating a DAQ Device
You can calibrate your device with VirtualBench-Device Calibrator by
following these steps:
1. Wait at least 15 minutes after both your computer and device are
powered on before calibrating your device.
2. Select the device you want to calibrate from the Device List.
3. Click on Calibrate. Calibration of your device may take some
time. Do not be alarmed if calibration takes up to 20 seconds.
4. Wait for calibration to complete before using any other
VirtualBench instrument.
Note: Please refer to the VirtualBench-Device Calibrator Online Help for
additional help on configuring VirtualBench-Device Calibrator for your
specific application.
06Chap10.fm Page 2 Friday, February 28, 1997 3:23 PM