Assembly Instructions

2
Book compartment installation instructions.
Removing Standard Apron Panel
Place the tabletop with apron side up on a clean surface.
Note: Surface should be clear of any objects or dirt to avoid any damage to tabletop.
Using a screwdriver, begin by removing one front apron panel from tabletop in
the following manner:
 Remove the screws that secure the apron panel to the tabletop (see figure A)
 Remove the screws that secure the front apron panel to the brackets. (see figure B)
 Remove the screws from the two apron panel reinforcement bars that attach to underside of
table. (see figure C)
Installing Book Compartment Apron Panel
Remove apron panel marked BC from tabletop carton and install onto tabletop in the following manner:
 Place the BC apron panel in the location where the original apron was located and
attach the brackets with two screws on each side.
 Further secure apron by inserting the screws from the front panel into the tabletop.
Installing Book Compartments
Place book compartments upside down on the tabletop and insert the bottom firmly into the
grooves on the apron panel (see figure D)
Using a Philips screwdriver, fasten twelve screws (for each compartment) into the holes of the
book compartment reinforcement bars. (See figure E)
Once book compartment installation has been completed, proceed to install legs by following
above instructions.