User's Manual

Figure 13 FileTransfer: Selecting a file to put
6. In order to disconnect from the other device, select the connected device and click the
“Disconnect”-button in the “Devices” section. (If you choose an unconnected device the
“Disconnect” button will simply remain disabled.)
4.2 LED INDICATORS
The LSE041 BlueCard has 2 LED indicators to report Data Transmission Rate and
Bluetooth-Power-On. The LED’s placing and indications are shown in Fig. 4 below.
Yellow flashes – Indicates Data Transmission Rate
Green lit – Indicates Power-On
4.3 TROUBLE SHOOTING
No Bluetooth printing window appears when you print.
→ Something may be wrong with the printer settings.
Go to the “Printer” and “Port settings” (alt. “Configure Port”) and verify that everything looks
OK. Check that the path to the WppClient.exe agrees with the path in the RPT-port
configurations. Check also that the correct RPT-port is selected for this printer.
The Bluetooth printing window appears but the Bluetooth status never leaves Idle.
→ The BTPrinter application can not find the LSE041 BlueCard or the local Bluetooth device
fails to answer to the reset command.
Make sure that the LSE041 BlueCard is properly inserted into the slot. Try ejecting the card
and inserting it again.
The Bluetooth printing window appears but you get the error: “Couldn’t find any Bluetooth
units within range”.
Figure 14 LED indicators