User's Manual

5. When prompted for “Setup Type”, choose “Typical”.
Figure 6 Installation: Type of installation
6. When asked if you want to install RedMon, answer “Yes”.
7. Installation is complete, but you must still configure a printer driver to use wireless
printing before using it.
4.1.3 Configuration of the printer driver for Wireless printing
4.1.3.1 Installation instructions for how to associate an already installed Windows (LPT) driver with the
Wireless printer (RPT) in Windows 98
1. Choose Start menu/Settings/Printers. Right-click the printer to use and select
“Properties”.
2. Select the “Details” tab and select a port of type RPT. If you do not see a free RPT port,
add one by clicking the “Add Port” button and select “Redirected Port”.
3. Click the “Configure Port” (alt. “Port Settings”) button. Click the “Browse” button and
locate “WPPClient” (it should be in C:/Program files/AnyCom/BlueCard if you used the
default settings in 4.1.2 above). Select and open WPPClient.
• DO NOT add any arguments to “Arguments for this program are:” edit field.
• Select “Program handles output” in the “Output” menu.
• Close this dialog box by clicking the OK button.
4. Close the “Printer” dialog box by clicking the OK button. A Bluecard dialog box will
appear, confirming that installation is successful. If you are not about to print anything
immediately, click the “Abort” button.