Instructions / Assembly

PRODUCT INSTRUCTIONS
2 Commerce Drive, Cranford, New Jersey 07016 www.nationaltree.com
IMPORTANT NOTE: Some unassembled section pieces
have light string wires strung between them. Be careful
not to put unnecessary strain on the wires during
assembly procedures.
Assembly
Attach each arm by inserting rods into loops as shown in
Figure 1.
Battery Installation
Open battery compartment and insert batteries
observing proper polarity (
+
/–).
Operation
Pressing the ON/OFF button once will turn on the lights.
Pressing the ON/OFF button a second time will turn the
lights off.
FIGURE 1
Item Nos. MZ17-6725 Made in China Printed in China
Warnings
• This product is for seasonal decoration only and not
intended for permanent installation or use.
• Do not mix old and new batteries. Replace all batteries
at the same time.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries or equivalent.
• Do not use rechargeable batteries.
• Do not dispose of batteries in fire. Batteries may
explode and cause injury.
Storage
To avoid leakage and corrosion, remove batteries from
battery compartment before storage. Store product in a
cool, dry location, protected from sunlight
SAVE THESE INSTRUCTIONS