User Manual

Parameter Description
Key Adjusts the base key for the selected pad. See section Adjusting the
Base Key below.
Choke Configures the Choke Group for the selected pad. See section Using
Choke Groups below.
Link Configures Pad Link for the selected pad. See section Using Link
Groups below.
6.1.2 Choosing a Pad Input Mode
By default, your pads play all Sounds of the selected Group — we call this Pad Mode. Further-
more they are velocity sensitive, meaning they will play louder if you hit them harder. You can
change this behavior and choose another pad mode in order to adapt your pads to various sit-
uations.
Using Pad Mode
The PAD MODE button located above the pads allows you to switch the controller to Pad
mode. This will map the Sounds contained in your Group to the pads.
► To enter Pad mode, press PAD MODE.
→ The display now shows the name of the selected Sound.
Using the 16 Velocities and Fixed Velocity Options
When using the controller in Pad mode, you can apply either of two additional options which
support your playing in specific situations.
▪ The Fixed Velocity option is available when your pads are in Pad mode (default mode) or
Keyboard mode. With this option enabled, your pads play at the same volume no matter
how hard you hit the pads. To enable the Fixed Velocity option, press FIXED VEL. Press
again to disable.
▪ In 16 Velocities mode your pads all play the same note of the focused Sound but with six-
teen different velocity values. This can be useful to play or program complex drum fills.
The right display indicates the velocity values for each pad (all are shown in the color of
Playing on the Controller
Adjusting the Pads
MASCHINE MIKRO - Manual - 229