User Manual

Filter Perform FX in the Control area.
Main Page
Parameter Description
MODE Section
Mode Select an effect.
TOUCHSTRIP Section
Engage Activates the filter.
Frequency Sets the cutoff frequency according to the min/max range
parameters.
FILTER
Type Selects from Low Pass, Band Pass and High Pass modes.
Resonance Sets the resonance of the filter. Values over 100% will lead
to self-oscillation—be careful! Turn down the Output Gain
(and turn up the Saturation to compensate) in order to avoid
extremely loud ringing. Note that the resonance will sound
more pronounced at lower saturation settings and vice versa.
Setup Page
Parameter Description
RANGE Section
Min. Freq Sets the lower limit for cutoff frequency.
Effect Reference
Perform FX
MASCHINE MIKRO - Manual - 651