User Manual

socket (MIC) on your S4 until the level meters on your screen show a satisfying level (to
adjust the microphone input gain, you can follow the guidelines described in section
↑4.3, Adjusting Levels).
4. When the meters show a satisfying level, click Close at the bottom of the Preferences win-
dow to confirm your modifications.
For more info on the input routing, see section ↑7.4.2, Adjusting the Input Routing.
Once the microphone input gain is set, don’t touch this GAIN knob anymore. To control the
volume of your microphone within your mix, use the MIC VOL knob on the S4’s front panel in-
stead (see below).
Notes
Your microphone signal is now sent to the Aux channel in TRAKTOR. This has following inter-
esting consequences:
▪ The volume of the microphone is controlled by the MIC VOL knob on the front panel of
your S4:
▪ You can also control the microphone volume via the AUX knob at the right of the crossfad-
er in TRAKTOR:
▪ You can select the microphone signal for use in the Loop Recorder by choosing Aux in the
Loop Recorder’s Source menu:
Appendix A – Common Setups
Adding a Microphone
Traktor Kontrol S4 - Manual - 200