User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference- Introduction
- Performance Mode
- Browse Mode
- Capture Mode- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
 
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
 
- F1 Preferences
- Index
In  this  Manual,  we  always  refer  to  the  buttons  with  both  mode  names.  The  primary  mode  is
written without brackets, and the secondary mode with brackets. For example, the top-left but-
ton  in  the  middle  section  of  the  F1  is  the  SYNC  (MASTER)  button.  The  secondary  function
(Master mode) is always achieved by pressing SHIFT + the Mode button.
4.1.2 A Word on Sample Slot Parameters
Each Sample Slot has four parameters, which you can change directly with pads while pressing
SHIFT. The  parameter  names  appear  on both  sides  of the  F1's  Pad Matrix.  The  buttons are,
from top to bottom on the F1:
• KEYLOCK:  Toggles  the  Keylock  function  so  that  a  Sample  Slot's  pitch  will  not  change
when speed is changed.
• FX: Engages or disengages routing the Sample Slot's sound through the effects assigned
to the Deck. See the TRAKTOR 2 Manual for further information on FX routing.
• MONITOR: Toggles headphone monitoring, independent of Sample Slot volume.
• PUNCH:  Maintains  musical  phrasing  when  switching  between  Samples.  Each  Sample
takes over the playback position from the previous Sample with this parameter engaged,
thus, allowing you to "punch in" new Samples without having them play from their begin-
nings.
For more  information on  the  Sample Slot  parameters,  please see  ↑4.13,  Sample Slot Pa-
rameters.
TRAKTOR KONTROL F1 Reference
Introduction
TRAKTOR KONTROL F1 - Manual - 59










