User Manual

▪ Click the little square left of a Plug-in to bypass it (the bypassed Plug-in is grayed out) or
to re-insert it in the signal chain.
▪ Drag and drop Plug-ins to move them across the list.
This Plug-in List is the exact equivalent of the Plug-in List in the Control area of the Arrange
view. For all details, see section ↑6.1, Plug-in Overview.
(5) Fader section: Allows you to adjust the channel’s level, panoramic position, Mute and Cue
state. Following actions are available:
▪ Drag the fader vertically to adjust the level of the channel. This is equivalent to the Level
parameter on the Audio page of the channel’s Output properties (see ↑8.1.2, Configuring
the Main Output of Sounds and Groups). Additionally, the level meter shows you at any
time the level of the channel. The peak level value appears in gray above the level meter
and fader. If this peak value exceeds zero, it turns white to indicate clipping; click the
value to reset it.
▪ Drag the little horizontal slider at the top to adjust the panoramic position of the channel
in the stereo field. This is equivalent to the Pan parameter on the Audio page of the chan-
nel’s Output properties (see ↑8.1.2, Configuring the Main Output of Sounds and Groups).
▪ Click the Mute button to mute the channel, or right-click ([Ctrl]-click on Mac OS X) it to
mute all other channels (Solo function). See section ↑5.2.2, Mute and Solo for more in-
formation.
▪ Click the little headphones button to send the channel to / remove it from the Cue bus.
This is equivalent to the Cue parameter on the Audio page of the channel’s Output proper-
ties. See section ↑9.2.6, Using the Cue Bus for more information.
(6) Main audio output menu: Selects the destination of the channel’s main audio output. By de-
fault Sound channels are output to their parent Group, Group channels are output to the Mas-
ter, and the Master is output to the first stereo pair of outputs. Click the label to select another
destination. This control is equivalent to the Dest. selector on the Audio page of the Output
properties for the Sounds and Groups (see ↑8.1.2, Configuring the Main Output of Sounds and
Groups) and for the Master (see ↑8.1.4, Configuring the Master and Cue Outputs of MA-
SCHINE).
(7) Aux routing settings: Allows you to adjust the routing for both auxiliary outputs. Visible only
if the AUX button is enabled on the left of the Mixer. Click the AUX 1 or AUX 2 label to select
a destination for this aux output, adjust its level via the little knob on the right, and select its
Controlling Your Mix
The Mixer
MASCHINE STUDIO - Manual - 409