User's Manual

2. Release the GRID button.

The track's Beatgrid is corrected and saved with the track.

7.16. Mixing Tracks Using Jog Wheels

In this section, you learn how to mix your first two tracks using Deck A and Deck B, the Jog

Wheels and your headphones. At first, you will prepare the Mixer by adjusting the control elements

for mixing from Deck A to B. Then you will load the first track into Deck A, and begin to perform

step by step.

7.16.1. Prerequisites

Before you can start to mix your first tracks, you need to prepare the Mixer on your S2:

1. Set the crossfader to the left-most position.

2. Set Channel fader A and Channel fader B to maximum position.

3. Set the MASTER knob to center position.

4. Set the volume of your audio system or active speakers to minimum level.

7.16.2. Loading the First Track into Deck A

To load a track into Deck A:

1. Press the Browser View button to maximize the Browser view in the software.

Tutorials