User's Manual
Table Of Contents
- _
- Table of Contents
- 1. Disclaimer
- 2. Welcome to TRAKTOR KONTROL S3
- 3. Setting up TRAKTOR KONTROL S3
- 4. TRAKTOR KONTROL S3 Overview
- 5. Tutorials
- 5.1. Mixing Your First Tracks using Sync
- 5.2. Browsing and Loading Tracks
- 5.3. Controlling Track Playback
- 5.4. Previewing Tracks using the Cue Channel
- 5.5. Adjusting Volume Levels
- 5.6. Using the Equalizer to Tweak Your Sound
- 5.7. Adjusting Track Tempo
- 5.8. Locking the Key of Tracks
- 5.9. Playing with Mixer Effects
- 5.10. Playing with Cue Points
- 5.11. Playing with Loops
- 5.12. Mixing Tracks Using Jog Wheels
- 5.13. Using Flux and Reverse Modes
- 5.14. Working with the Preparation List
- 5.15. Correcting Beatgrids of Tracks
4. Press the Browser View button again to minimize the Browser View.
5. Press the Play/Pause button on Deck B to start playback.
The Waveform starts moving and the Channel Volume Meter LEDs in Mixer channel B illumi-
nate.
5.12.5. Syncing Tracks Manually
The process of manually syncing tracks consists of several steps. At first you need to align the
next track's audio signal level in Mixer channel B so that it matches to the running track's level in
Mixer channel A. Then you adjust the next track's tempo so that it matches to the running track's
tempo.
The you route the audio signal of Mixer channel B to the CUE channel to preview the next track
and adjust the audio signal level. Then you can manually sync next track's tempo to the running
track's tempo using the TEMPO fader and the Jog Wheel on that Deck.
Adjusting the Tracks' Audio Signal Levels
To adjust the the audio signal levels:
1. Put on your headphones.
2. Press the CUE button of Mixer channel B.
3. Adjust the Mixer channel's GAIN level by turning its GAIN knob, so that it matches to Mixer
channel A.
Tutorials
30