User Manual

Table Of Contents

7.8 Using ARP with a Sustain Pedal

You can use a sustain pedal to alter the behavior of the arpeggiator. A sustain pedal can be

connected in the rear panel of your KOMPLETE KONTROL S-SERIES keyboard via 1/4" sock-

ets.

The pedal inputs on the rear panel of your keyboard

Pressing Sustain Pedal when ARP is On

▪ Pressing the sustain pedal while keys are held and then releasing those keys continues the

arpeggiated sequence. This way the footswitch behaves as an arp trig function.

▪ When a new key is pressed, the new note is added to the current sequence.

Releasing Sustain Pedal when ARP is On

▪ Releasing the sustain pedal with no keys pressed stops the sequence and all playing notes.

▪ Releasing the sustain pedal with keys still pressed removes all notes from the sequence ex-

cept those corresponding to the pressed keys—the sequence continues with the pressed

keys only

7.9 Scale and Arp MIDI Output

KOMPLETE KONTROL outputs the processed MIDI notes from the scale engine and the arpeg-

giator through the MIDI outputs of the KOMPLETE KONTROL stand-alone application as well

as the KOMPLETE KONTROL plug-in. You can route the MIDI notes to other MIDI instruments

or record them as a MIDI pattern in your host application.

KOMPLETE KONTROL Smart Play

Using ARP with a Sustain Pedal

KOMPLETE KONTROL - Manual - 239