Installation Sheet

1. Apply a small bead of 100%
Silicone
(non-water based) to the
underside of strainer body
flange (3).
2. Place strainer body (3)
into sink
3. Place rubber seal (4) on top
of drain cup (5).
4.
Place tightening screw (2)
into center of strainer
body (3) and secure .
5. Lubricate (1) with liquid
soap. Place strainer
basket (1) into strainer
body (3).
6. Attach drain pipe (not
shown) to drain cup (5)
using nut (6).
1
2
3
4
5
2” JR. BASKET STRAINER, DR220
6
Remove all excess silicone around the drain after the drain has been installed
WWW.NATIVETRAILSHOME.COM
INSTALLATION INSTRUCTIONS
SINK
WWW.NATIVETRAILSHOME.COM
WWW.NATIVETRAILSHOME.COMWWW.NATIVETRAILSHOME.COM