Installation Guide

Install first row of block (4 units).

Place the 4 blocks in a square in the center of the

excavated area.

There will be an 8" square opening in the center of

the column.

Level the blocks from front to back and side to side.

Blocks may need to be shifted slightly in order to

get a tight fit between all the blocks on the first

course.

STEP 2 - First Row

STEP 1 - Level the Pad

Excavate an area that is 36" square and 12"

deep. Place 6" of compacted granular

material in the excavated area for the

leveling pad

Column Kit

36" & 42"

INSTALLATION INSTRUCTIONS

Thank you for purchasing the Column Kit from

Natural Concrete Products! Our Column Kit offers a natural-looking stone

profile sure to elevate the looks of any outdoor space.

TOOLS NEEDED FOR INSTALLATION:

**SAFETY FIRST! Before you dig, be sure to call your local utilities to mark any

underground cables and pipes in the excavated area.

Level

Tape Measure

Shovel

6Cubic Feet of Gravel

2 - 12oz Concrete Adhesive

PAGE 1
Column Kit 36" & 42" INSTALLATION INSTRUCTIONS Thank you for purchasing the Column Kit from Natural Concrete Products! Our Column Kit offers a natural-looking stone profile sure to elevate the looks of any outdoor space. TOOLS NEEDED FOR INSTALLATION: Level Tape Measure Shovel 6 Cubic Feet of Gravel 2 - 12oz Concrete Adhesive **SAFETY FIRST! Before you dig, be sure to call your local utilities to mark any underground cables and pipes in the excavated area.
PAGE 2
COLUMN KIT INSTALLATION INSTRUCTIONS STEP 3 - Second Row Install second row of blocks (4 units). Place the first block on top of the bottom block staggering the intersection of two blocks on the course below. Continue around the column making slight adjustments as needed so that the edge of the blocks fit tightly. Adhere each block to the blocks below with a quality concrete adhesive. STEP 4 - Repeat Follow the guidelines in step 3 to assemble the rest of the column to the desired height.