Installation Guide

NATURAL CURRENT INSTALLATION GUIDE
Installation
1) Take the Savior out of the delivery box, unwrap and placing it on the surface of your in-ground or above
ground swimming pool or spa.
2) Once Savior is in the pool or spa, with the solar panel facing up and filters in the water.
3) Be sure the Savior can see direct sunlight for it to run and filter the water.
4) If you have anything in the way of sunlight within you pool water surface, then you may tether (leash)
the Savior in a sunlit area of your pool.
5) There is no On or Off switch. To turn off the unit, place a towel on top of the solar panel or remove
from pool or spa and gently place upside down on the ground in a shaded area.
NATURAL CURRENT | PO Box 3803, Dana Point, CA 92629 | Phone: [phone]
E-Mail: [e-mail] | Web Site: http://www.naturalcurrent.com