Installation Guide

The process of installing new carpet is one of the most
important factors in assuring that the chosen carpet
looks good in the facility and wears well. CRI
advises specifiers to use the services of an installation
contractor who will install the carpet in accordance
with Standard for Installation of Commercial Carpet,
CRI-104. Companies authorized to display CRI’s
Seal of Approval and/or certified by the Floor
Covering Installation Board (FCIB) have pledged in
writing to adhere to these standards. Using products
that display the CRI Indoor Air Quality Testing
Program label (low-emitting adhesives, moldings,
base materials, cushions, etc.) and following proper
installation procedures are also necessary to ensure
good indoor air quality.
The installation must be properly planned, estimated
and coordinated. The plan must include accurate
measurements, show seam placement, and detail
areas requiring special considerations, such as
unusual room shapes, closets, borders, etc.
A. Specifiers will:
1. Provide drawings with approved location of
seams, edge moldings, carpet direction and
accessories (adhesives, cushion, etc.).
B. The general contractor will:
1. Provide an appropriate surface upon which
to install carpets, including confirmation of
concrete moisture and alkali conditions,
cleanliness, surface quality and floor levelness.
2. Provide for appropriate room temperatures
48 hours prior to installation (65˚ to 95˚F)
and for appropriate temperatures and
ventilation during and 48 to 72 hours after
installation.
C. The installation contractor will:
1. Use qualified labor and specified tools and
accessories.
2. Provide accuracy of measurement.
3. Coordinate with the general contractor all
applicable details, including the installation
date, delivery, storage, security, and insurance.
Regardless of the installation method, it is the
specifier’s responsibility to ensure proper transitions
where the carpet edge meets other flooring surfaces.
SECTION 3
3-1
CARPET INSTALLATION