Installation Guide

Step 1

Place a bead of construction adhesive on the back of one mantel leg, then position it in

place, and secure it using a metal strap or angle bracket. You will likely need to brace it

to hold it in position while the adhesive dries. Repeat on the other side, insuring proper

positioning to accept and align with the marble header and shelf components.

Step 2

Apply a very small amount of adhesive to the edges of the header that will abut with the

marble legs, and position the header in place. Wipe away any adhesive that is exposed

before it dries.

Step 3

Apply a small amount of construction adhesive to the top edges of the header and/or

any part of the legs that will abut the bottom of the top shelf component(s,) and position

the top shelf, wiping away any excess construction adhesive quickly.

Step 4

Step back and inspect for proper alignment, make any adjustments needed, wipe any

excess adhesive, and if you like, use a good car wax, then buff, following

manufacturer’s instructions.

Step 5

Love the way you live!