How to Guide

4 Pack Solar Step Light
User Manual
Item #21062
V1.1 E&F-M 22Jun2020
Reference Part Description Quantity
Parts List
11
Solar Step Light
4
Installation
                  
                   
 
1. Carefully remove all the fittings
from the box
2. Find a suitable location for the
Solar Step Lights, on a wall, step,
or stairs..
3. Measure the width of two holes on
the back of the Solar Step Light to
align holes for 2 the screws on the
surface.
4. If mounting on masonry, brick, or cement, use a drill for the holes insert wall plugs and fixing screws.
Insert the wall plugs supplied so they are flush with the surface. Insert the screws and leave at least ¼”,
or 5 mm of the screws outside of the surface for holding the Solar Step Light.
5. Mount the Solar Step Light on the screws by placing the unit over the holes.
Operating Instructions
SWITCH
1. For normal operation, turn the switch to the “AUTO”
position, this will automatically turn the unit ON at
dusk
2. The performance of the Solar Step Lights will vary
during the time of year. The light will deliver more
intensity
when it has had a full day of sun rather
than a day in cloudy or overcast weather.
Page 1 of 4