V1.1-M 7Aug2020 Nature Power 400 Watt Power Inverter User Manual WARNING: Read carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Intended Use Power Inverters convert DC electricity to AC electricity then offer power to small electrical equipment and digital products. It has been widely used in cars, steamboats, mobile office, post and telecommunications, public security and emergency. Electrical equipment can not be used: 1, Generally capacitive load and perceptual load appliances are inapplicability: Air condition, high power electric drill, fridge, microwave oven, blender.
Specifications Operating input voltage ..........................................................................12.8-13.2 VDC Nominal input voltage ..................................................................................115±5 VAC Nominal output voltage ................................................................................115±5 VAC Output frequency ..............................................................................................60±3 Hz USB ...................................
Important Safety Instructions 1. This manual contains important safety and operating instructions for power inverter. This manual will show you how to use your inverter safely and effectively. Please read, understand and follow these instructions and precautions carefully. 2. Keep out of reach of children. 3. Do not expose inverter to rain or snow. 4. Use of an attachment not recommended or sold by the unit manufacturer may result in a risk of fire, electric shock, or injury to persons. 5.
Operating instruction Connecting inverter to 12V battery / vehicle 1. Locate the Positive and Negative terminals on the inverter 2. From the POSITIVE (RED) and the NEGATIVE (BLACK) terminals, remove the hex nut, 3. Place the POSITIVE (RED) ring connector onto the POSITIVE (RED) inverter terminal. Place the NEGATIVE (BLACK) ring connector onto the NEGATIVE (BLACK) inverter terminal. 4. Put hex nut back on inverter and tighten. 5. Switch the inverter to OFF (O) position.
Operating 1. Connect the inverter to power source (see inverter connecting section). 2. Switch the inverter’s ON/OFF switch to the ON (I) position. 3. The GREEN LED indicator will light, indicating the inverter is receiving power. 4. Switch the inverter’s ON/OFF switch to the OFF (O) position. 5. Make sure the device to be operated is turned OFF. 6. Plug the device into the inverter’s AC outlet. 7. Switch the inverter’s ON/OFF switch to the ON (I) position. 8. Turn the device on. 9.
Trouble Shooting Problem RED LED is ON Alarm sounds and/or inverter does not function Device does not operate properly when first connect to the inverter Possible Cause Reason/solution Poor contact at terminals Check for poor connection to battery or power supply. make sure connection points are clean. Connection reversed Unplug the inverter and reverse the clamps. Battery low Switch OFF inverter and change battery.
Limited Warranty Nature Power warrants our products to the original purchaser that this product is free from defects in materials and workmanship for the period of 1 year from date of purchase, In the case of product defect, contact Nature Power customer service to receive trouble shooting. If defective part or unit should be returned, a Return Authorization Number must be issued by Nature Power and the defective part or unit should be returned to the authorized location at the purchasers’ expense.
