Replacement Part List

V1.1
Estimate Run time on Load
Following run time is an estimate based on using a 12V-120AH battery bank for reference. Actual
run time may vary.
Load
Consumption
Estimate Run time
Cordless Phone
5W
180 hrs
Clock/Radio
8W
135 hrs
Table Lamp
40W/60W
27 hrs/ 18 hrs
Freezer (8.8 cu. ft.)
80W
15 hrs
20” LCD TV
100W
11.5 hrs
Refrigerator (18 cu. ft.)
120W
9 hrs
Sump Pump (1/2 hp)
350W
3 hrs
Microwave (mid-size)
1000W
49 min
Coffee Maker
1200W
37 min
5. TROUBLESHOOTING
To trouble shoot the unit, please note the error code display on the main unit and review the
“Understanding the Error Codes” in section 4.
Problem
Symptom
Solution
No output voltage.
And Status LED is
off.
The unit is off
Turn unit ON by following the instruction in
Section 4 to turn unit ON
No power to inverter
Check fuse or the Disconnect switch (if
installed) is either blown or turn OFF
No AC output.
Status LED is
Green
GFCI was tripped
Check load and reset the GFCI
No Output. Status
LED is in Amber
Check error code on
display
Verify the error condition and make
correction
Products
connected to unit
malfunction or
overheat
Products connected to
unit do not accept
modified sine wave output
(38210, 38215 only)
Products are not compatible with the
modified sine wave output generated by the
NATURE POWER Power Inverter. See “AC
Load on Power Inverter” in Section 4