Power Inverters convert DC electricity to AC electricity then offer power to small electrical equipment and digital products. It has been widely used in cars, steamboats, mobile office, post and telecommunications, public security and emergency. Electrical equipment can not be used: 1, Generally capacities load and perceptual load appliances ara Inapplicable: Alr condition, high power strict drill, fridge, microwave oven, blender.
00Watt | 400 Watt Operating input voltage 105-15 VDC Nominal input voltage Nominal cutout voltage 11545 VAC Output frequency 6013 Hz usB 2x&Vi21A Continuous output power 300W 400 W Surge output power 600 W S00W Waveform Modified sine wave Efficiency (typical) > 90% No load current <0.6A Input over voltage lama 14.
1. This manual contains important safety and operating instructions for power inverter. ‘This manual will show you how to use your Inverter safely and effectively. Pleads read, understand and follow these Instructions and precautions carefully. 2. Keep out of reach of children. 3. Do not expose inverter to rain or snow. 4. Use of an attachment not recommended or sold by the unit manufacturer may result In a risk of fire, electric shock, or Injury to persons. 5.
Connecting Inverter to 12V battery / vehicle 1. Locate the Positive and Negative terminals on the inverter From the POSITIVE (RED) and the NEGATIVE (BLACK) terminals, remove the hex nut, Place the POSITIVE (RED) ring connector onto the POSITIVE (RED) inverter terminal Place the NEGATIVE (BLACK) ring connector onto the NEGATIVE (BLACK) inverter terminal Put hex nut back on Inverter and tighten. Switch the inverter to OFF (0) position.
Operating 1. Connect the Inverter to power source (see Inverter connecting section). 2. Switch the Inverters ON/OFF switch to the ON (1) position. 3. The GREEN LED indicator will light, indicating the inverter is receiving power. 4. Switch the inverter's ON/OFF switch to the OFF (O) position. 5. Make sure the advice to be operated Is muted OFF. 6. Plug the device Into the Inverter's AC outset 7. Switch the inverter's ON/OFF switch to the ON (1) position. 8. Tum the device on. 9.
Cautions 1, If more than one device Is to be powered, start one device at a ime, to avoid a power surge and overloading the Inverter. The surge load of each device should not excess the inverter's Continuous Operation wattage rate. 2, Load devices should not exceed 150 Watt when using in the vehicle. 3, Keep the car running at all times when using the Inverter. 4.The Inverter draws ow amperage from the battery with the man ON OFF switch muted on and no load connected.
Nature Power warrants our products to the original purchaser that this product Is free from defaces in materials and workmanship for the period of 1 year from date of purchase, In the case of product defect, contact Nature Power customer service fo receive trouble shooting. If defective part or unit should be resumed, a Return Authorization Number must be Issued by Nature Power and the defective part or unit should be resumed to the authorized location at the purchasers’ expense.