Installation Guide

Reference
Quantity
1
110W Solar panel
3
Parts List
2
30 AMP charge controller
1
3
Manual
1
4
750W Power Inverter
1
Installation Instruction
5
3in1 or 4in1 SAE cable
1
6
1
7 Bare end -Battery clamp cable
1
53330
Quantity
110W Solar panel
4
30 AMP charge controller
1
Manual
1
750W Power Inverter
1
4in1 SAE cable
1
SAE-Bare end cable
1
Bare end -Battery clamp cable
1
53440
* *
*
SAE-Bare end cable may not included
Step1 Connect the charge controller to battery with SAE-battery clamp cable, Parallel connections = Positive
to Positive and Negative to Negative.
Step2 Connect 3 in1 SAE-bare end cable* with charge controller.
Step3 Connect solar panels with the 3 in 1 SAE cable.
Step4 Connect the 750 Watt power inverter to battery by "bare end - battery clamp" cable which included as
the inverter accessories.
* If 330W solar kit comes with 4 in 1 SAE cable, please refer to the 440W solar kit installation.
Parts List
53330-330W Solar Kit
SAE-Bare end cable
Page 5 of 11
8 Z-bracket / set
3 4
Z-bracket / set