Manualshelf

Installation Guide

ManualsBrandsNature Power ManualsElectrical330-Watt Polycrystalline Solar Power Kit with 3 x 110-Watt Panels, 750-Watt Power Inverter and 30 Amp Charge Controller
12345678910
Step1 Connect the charge controller to battery with SAE-battery clamp cable, Parallel connections = Positive to
Positive and Negative to Negative
Step2 Connect the SAE-Bare end cable to charge controller.
Step3 Connect SAE 4 in1 cable
* with SAE-bare end cable.
Step4 Connect solar panels with the 4 in 1 SAE
Step5 Connect the 750 Watt power inverter to battery by "bare end - battery clamp" cable which included as the
inverter accessories.
* If 440W solar kit comes with 4 in 1 SAE- bare end cable, please refer to the 330W solar kit installation.
53440-440W Solar Kit
Page 6 of 11