Instructions / Assembly

9
6.1. Single wind generator
See Diagram below for further wiring information
Wind T urbine G enerator
The controller Indicator Lamp
Mode
Lamp
LED reading
Status
Cause
Operation
Normal mode
No light
0. 0.
not reach charging
wind speed
Rotor not reaching 500rpm
charging speed
Normally
Normal mode
Solid Green
Current
power
Charging wind
speed to 12m/s
Rotor rotating at
500-1400rpm
Normally
Normal mode
Flashing red
0. 0.
Rotor rotating at low
spin or stop
Battery fully charged
(voltage exceeds14.2V)
Normally
Normal mode
Solid red
0. 0.
Rotor rotating at low
spin or stop
Over speed, Rotor
rotating over 1400rpm
Waiting 15mins,
then restart the
system
Stop mode
Solid red
No
display
Rotor rotating at low
spin or stop
Battery voltage
exceeds17.5V
System returns
tonormal mode
if the battery
voltage drops
below 13.2V.
0. 0.
Controller
temperature
exceeded 85C
System returns to
norm al mode if
controller
temperature drops
belo w 60C
Stop mode
Flashing red
about 2sec
No
display
rotation and stop
suddenly
No Battery or cable
loose
Connect with batte ry
the system come to
norm al