Full Product Manual

Visit NaturesGenerator.com for More Information
Step 5: Place one of the blades on one of the hub socket. Place a lock washer and then a flat washer
on the blot and then insert the bolt through the blade ad the socket. Place a nut on the other side
of socket and ghten the bolt with the 5mm hex key. Repeat this process on all five blades. Make
sure the lock washer and flat washer are placed in the right order. The blades will become loose if
it is not installed properly.
Step 6: Slide the blade assembly onto the rotor sha and place the lock washer and lock nut
on the sha.
M6 nut
M6 flat washer
M6 lock washer
M6 bolt
M16 lock nut
M16 lock washer
10
5mm hex key
Locker washer and flat washer
must be placed in the right order
to secure the blades in place.