Operations and Maintenance Manual

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-86 Issue 10.0 2019-01-18
RDS Settings. When you select RDS Settings from the Preset editing options screen, you can
edit various RDS parameters (see Figure 2.65).
If you change a preset setting on the front panel UI, it will also be reflected on the remote AUI,
and vice versa.
Figure 2.65: RDS Settings menu
Use the up and down buttons to move the cursor to the desired RDS setting and then press the
right button to enable editing of the parameter.
Figure 2.66 on page 2-87 shows all the editing screens for the RDS Settings menu. Within any
of the editing screens, use the arrow buttons to edit or toggle a parameter value, noting the
minimum and maximum limitations indicated at the bottom of the display (as applicable). If
you select DI Code (see Figure 2.67 on page 2-88) or AF Data (see Figure 2.68 on page 2-88),
there are associated sub-menus that contain additional setting options.
When complete, press the accept (checkmark) button to save the change. Press the cancel ( X )
button to discard changes and return to the previous menu.
Note:
RDS Settings have been described in detail in the remote AUI section. See page 2-64
for more information.