Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-92 Issue 10.0 2019-01-18
Figure 2.73: L/R Limiter sub-menu and editing screens
Use the up and down arrows to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (X) button to discard changes and return to the
previous menu. Default selection is OFF.
Use the up and down arrows to select a time constant be-
tween 0 and 60 s, then press the accept (checkmark) button
to save the change. Press the cancel (X) button to discard
changes and return to the previous menu. Default time con-
stant is 5.000 s.
Use the up and down arrows to select a hold time between 0
and 60 s, then press the accept (checkmark) button to save
the change. Press the cancel (X) button to discard changes
and return to the previous menu. Default hold time is 5.000 s.
Use the up and down arrows to select a maximum gain be-
tween -30 and 30 dB, then press the accept (checkmark)
button to save the change. Press the cancel (X) button to dis-
card changes and return to the previous menu. Default gain
is 12.0 dB.