Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-94 Issue 10.0 2019-01-18
Figure 2.76: Mod Loss editing screens
•
Enable:
Determines whether the audio loss feature is used. Select ON or OFF.
•
Threshold:
Sets the audio threshold below which the transmitter will take action.
Select a value between 0 and 100%.
•
Timeout:
Sets the time period of low audio (based on the threshold setting) after which
the transmitter will take action. Select a value between 0 and 14400 seconds (240 min-
utes).
•
Action:
Determines the action taken by the transmitter when the audio has been below
the threshold for the timeout period. Select Alarm Only, Change Preset or RF Inhibit.
•
Preset:
Determines the preset that becomes active after an audio loss if the audio loss
action is set to Change Preset.
See Configuring an audio loss backup preset - see page 4-5 for detailed instructions.