Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Issue 10.0 2019-01-18 Page 2-117
Installed Exciter
From the front panel UI, you can configure the transmitter for the type/location of the
installed exciter. To view the
Installed Exc
screen, select
System Settings -> HW Config ->
Installed Exc
from the
Main Menu
(see Figure 2.101).
Figure 2.101: Installed Exciter Screen
Use the up and down buttons to select the appropriate exciter configuration - Internal VS
Exciter, VS HD Exciter or External FM Exciter. Press the accept (checkmark) button to save
the change. Press
X
to abort the change and return to the previous menu.
• If you select
VS HD Exciter
, make sure the transmitter has been physically modified to
operate with the VSHD exciter (if necessary, refer to the associated modification docu-
ment FM11005 to modify and configure the transmitter for operation with a VSHD
exciter).
• If you select
External FM Exciter
, make sure the transmitter has been physically modi-
fied to accept an external exciter (see the Installation Manual’s Commissioning sec-
tion).