Operations and Maintenance Manual

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-124 Issue 10.0 2019-01-18
Procedure to change user permissions (see Figure 2.106 on page 2-122):
1. Open the User Accounts page.
2. Select a user from the Users list to display the permissions for that user in the center of
the Permissions window. The permissions associated with the selected user are
identified with a checkmark (  ).
3. Press on User Type to reveal a drop-down menu and select a new type of user.
4. If the user type in step 3 is Custom , set individual permissions. Under Permissions ,
place a checkmark (  ) beside each permission that you want to associate with the user.
The boxes work like a toggle - select the checkbox to place a checkmark and select
again to remove the checkmark. Choose one or more of the following options:
5. Activate/Modify Preset - Allows the user to modify presets and change active preset.
6. Power Control - Allows the user to change the power set point of the transmitter..
7. Delete Logs - Allows the user to remove log entries.
8. RF On/Off - Allows the user to turn the RF output on and off..
9. All Other Settings - Allows the user to adjust all settings not mentioned above, except
for administrating user accounts.
10. Press Apply to assign the new permissions to the selected user.
Removing an Account
To remove a user account, select the desired user from the List of Users and click the Delete
button. A verification prompt will appear. Click the OK button to accept changes or the Cancel
button to discard changes and exit this menu.
To save your changes, click Apply .
First-Time Login
When you enter the User Accounts page for the first time, it is recommended you create an
account and then delete the default Nautel account, as follows:
1. Login to the AUI using the default Username (“Nautel”) and Password (blank).
2. Set up your own Administrator account, with your desired Username and Password.
3. Logout of the AUI, then login to your new Administrator account.
4. Delete the “Nautel” account.