Operations and Maintenance Manual
Table Of Contents
- Release control record
- Section 1: Description
- Section 2: Operating the transmitter
- User Interfaces
- Viewing Transmitter Log
- Viewing AUI Tool Menu Panels
- Viewing Real-Time Meters
- Managing Presets
- Enabling Remote Control
- Resetting Alarms
- Viewing Transmitter Status
- System Settings
- System Settings - Front Panel UI
- Setting User Accounts
- User Settings - AUI
- User Settings - Front Panel UI
- Configuring Remote Inputs and Outputs
- Scheduler
- Audio Player
- Enabling and Operating the Orban Audio Processor
- Figure 2-1 : VS Transmitter Front Panel Display Menu Tree (Sheet 1 of 2)
- Figure 2-2 : VS Transmitter Front Panel Display Menu Tree - Edit Presets (Sheet 2 of 2)
- Figure 2-3 : VS Transmitter AUI Flow Diagram
- Section 3: Routine maintenance
- Section 4: Non-standard maintenance
- Section 5: List of terms
VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-126 Issue 10.0 2019-01-18
•
Notifications:
Allows configuration of email notifications to be sent for user-selected
alarm occurrences (see Notifications on page 2-133).
• Exgine Settings: Allows you to set signal parameters and determine IP information for
use with the Exgine option (VSHD only). See Configuring Exgine Settings - VSHD
exciter only on page 2-135.
•
SNMP Configuration:
Allows configuration of SNMP settings (see SNMP configura-
tion on page 2-137).
•
Capture Critical Parameters:
Allows the user to capture critical parameter data for the
transmitter’s current state and paste it to a spreadsheet program (see Critical parame-
ters on page 2-139).
•
External 10MHz:
Allows for confirmation of the use of an external 10 MHz reference
(see External 10MHz on page 2-140).
•
Spectrum Mask
: Allows users to select the appropriate FM mask standard (FCC, ETSI
or None) being used by the analyzer (see Spectrum Mask on page 2-142).
•
Time Setup:
Allows for adjustment of the AUI clock’s time, date, region and time zone
(see Setting the Clock on page 2-144).
•
NTP Servers:
Allows for configuration and management of NTP servers (see NTP serv-
ers on page 2-147). NTP must be enabled to allow editing; this can only be done using
the front panel UI (see Enabling NTP on page 2-147).
•
Nautel Phone Home
: Provides a unique diagnostic tool that leverages stored
transmitter information to assist in the analysis of the cause of specific alarms (see Nau-
tel Phone Home on page 2-149).
•
Call Sign/ID:
You can set a name that identifies the transmitter on the AUI (see Setting
call sign/ID on page 2-150).
•
Audio Low Thresholds:
Provides adjustable thresholds for low audio [the main
audio
source and SCA audio source (configurable timeout and trip level)]. See Setting Audio
Low Thresholds on page 2-151.
Note:
The front panel UI also has a
User Settings
menu, which contains similar functions
to the AUI (e.g., network setup, time setup), and other settings that are described in
User Settings - Front Panel UI on page 2-153. Unless otherwise noted, the
following functions are only available via a LAN connection to the remote AUI.